Clevis
1. anlamı ([[isim]]). kenet demiri.2. anlamı kenet demiri. çatal.
3. anlamı kilit.
Clevis
2. anlamı kenet demiri. çatal.
3. anlamı kilit.
Clevis
Kelime: clev·isSöyleniş: 'kle-v&s
İşlev: noun
Kökeni: earlier clevi, perhaps of Scandinavian origin; akin to Old Norse kljufa to split -- more at CLEAVE
Tarih: 1592
: SHACKLE 3
1. A piece of metal bent in the form of an oxbow, with the two ends perforated to receive a pin, used on the end of the tongue of a plow, wagen, etc., to attach it to a draft chain, whiffletree, etc.; called also clavel, clevy. a coupler shaped like the letter U with holes through each end so a bolt or pin can pass through the holes to complete the coupling; used to attach a drawbar to a plow or wagon or trailer etc.2. A U-shaped yoke with internal threads in one end which can be attached to a threaded rod and the other end a connection with a hole used for a pin or bolt attchment . . a "U" shaped mounting device that contains a common pin hole at right angle or normal to the axis of symmetry through each extension .3. A U-shaped metal piece with holes in each end through which a pin or bolt is run, used for attaching a drawbar to a plow.4. A "U"-shaped yoke device with a bolt or pin through the two ends.5. A clevis is a fitting having a U-shaped end and arranged for attaching to the end of a pipe or rod .6. A sprung link connecting a control rod to the surface being controlled .7. A connector used on a push rod to connect the push rod to a control horn on a flying surface or to a servo arm A Clevis can be nylon or metal Some can be soldered in place while others can be adjusted by screwing them onto the push rod .8. A device for mounting cylinders . . a forked device used to pin the end of a rod on a gusset plate or other structural part The clevis may be adjustable or fixed An adjustable member with a fixed clevis at one end may be fitted with a thread and nut at its opposite end, while one having fixed clevises at each end may be fitted with either a sleeve nut or a turnbuckle in its midlength portion Lateral bracing and tie-rod diagonals on steel trusses often use clevises.9. The clevis is a small fastener at the end of a pushrod, usually made from nylon or metal, which connects the pushrod to the control horn Clevises may frequently be refered to as links .10. A U-shaped piece of steel with holes in the ends through which a pin is attached making it a "D" shaped link Frequently used to attach safety chains .11. A "U" shaped fitting with pin Equalizing Thimbles - Special type of fitting used as a component part of some wire rope slings. . a coupler shaped like the letter U with holes through each end so a bolt or pin can pass through the holes to complete the coupling; used to attach a drawbar to a plow or wagon or trailer etc .
Bu konuda henüz görüş yok.
